金刚石磨具磨粒出刃高度的测试与调控研究进展(7)
【作者】网站采编
【关键词】
【摘要】[55] HOU Z B, KOMANDURI R. On the mechanics of the grinding process-part I. Stochastic nature of the grinding process [J]. International Journal of Machine Tools Manufacture, 2004, 44(2): 247-270. [57
[55] HOU Z B, KOMANDURI R. On the mechanics of the grinding process-part I. Stochastic nature of the grinding process [J]. International Journal of Machine Tools & Manufacture, 2003, 43(15): 1579-1593.
[56] HOU Z B, KOMANDURI R. On the mechanics of the grinding process, part II—thermal analysis of fine grinding [J]. International Journal of Machine Tools & Manufacture, 2004, 44(2): 247-270.
[57] HOU Z B, KOMANDURI R. On the mechanics of the grinding process, part III—thermal analysis of the abrasive cut-off operation [J]. International Journal of Machine Tools & Manufacture, 2004, 44(2): 271-289.
[58] YAN L, RONG Y M, JIANG F, et al. Three-dimension surface characterization of grinding wheel using white light interferometer [J]. International Journal of Advanced Manufacturing Technology, 2011, 55(1-4): 133-141.
[59] 梅益铭. 单磨粒磨削中的磨粒磨损过程及磨损状态监测方法研究 [D]. 杭州: 浙江大学, 2017.
MEI Yiming. Study on abrasive wear process and wear condition monitoring method in single abrasive grinding [D]. Hangzhou: Zhejiang University, 2017.
[60] 王秋燕, 梁志强, 王西彬, 等. 超声振动螺线磨削表面微观形貌建模与仿真研究 [J]. 机械工程学报, 2017, 53(19): 83-89.
WANG Qiuyan, LIANG Zhiqiang, WANG Xibin, et al. Research on modeling and simulation of surface microtopography in ultrasonic vibration spiral grinding [J]. Journal of Mechanical Engineering, 2017, 53(19): 83-89.
[61] CHOU Y M, POLANSKY A M, MASON R L. Transforming non-normal data to normality in statistical process control [J]. Journal of Quality Technology, 1998, 30(2): 133-141.
[62] NGUYEN T A, BUTLER D L. Simulation of precision grinding process, part 1: generation of the grinding wheel surface [J]. International Journal of Machine Tools & Manufacture, 2005, 45(11): 1321-1328.
[63] 高琦. 基于小波变换的金刚石砂轮表面形貌三维评定参数的研究 [D]. 泉州: 华侨大学, 2014.
GAO Qi. The study of diamond grinding wheel surface topography and 3D evaluation parameters based on wavelet transform [D]. Quanzhou: Huaqiao University, 2014.
[64] HECKER R L, LIANG S Y, WU X J, et al. Grinding force and power modeling based on chip thickness analysis [J]. International Journal of Advanced Manufacturing Technology, 2007, 33(5-6): 449-459.
[65] AGARWAL S, RAO P V. A probabilistic approach to predict surface roughness in ceramic grinding [J]. International Journal of Machine Tools & Manufacture, 2005, 45(6): 609-616.
[66] AGARWAL S, RAO P V. Predictive modeling of force and power based on a new analytical undeformed chip thickness model in ceramic grinding [J]. International Journal of Machine Tools & Manufacture, 2013, 65(2): 68-78.
[67] 郎献军, 何玉辉, 唐进元, 等. 基于磨粒突出高度为瑞利分布的磨削力模型 [J]. 中南大学学报(自然科学版), 2014(10): 3386-3391.
LANG Xianjun, HE Yuhui, TANG Jinyuan, et al. Grinding force model based on prominent height of abrasive submitted to Rayleigh distribution [J]. Journal of Central South University (Science and Technology), 2014(10): 3386-3391.
[68] KOSHY P, JAIN V K, LAL G K. Stochastic simulation approach to modelling diamond wheel topography [J]. International Journal of Machine Tools & Manufacture, 1997, 37(6): 751-761.
[69] 王志伟, 俞冬强, 陈佳杰, 等. 磨粒的几何形状研究综述 [J]. 现代制造工程, 2008(11): 1-4.
WANG Zhiwei, YU Dongqiang, CHEN Jiajie, et al. Review on the shape of abrasive particle [J]. Modern Manufacturing Engineering, 2008(11): 1-4.
[70] 党希敏, 谢晋. 金刚石砂轮中磨粒出刃的分形分析 [J]. 装备制造技术, 2007(2): 14-16.
DANG Ximin, XIE Jin. Analysis of fractal dimension of abrasive grain protrusion in diamond grinding wheel [J]. Equipment Manufacturing Technology, 2007(2): 14-16.
[71] RAMASAWMY H, BLUNT L. 3D surface topography assessment of the effect of different electrolytes during electrochemical polishing of EDM surfaces [J]. International Journal of Machine Tools & Manufacture, 2002, 42(5): 567-574.
[72] KEM S, AHN J H. Decision of dressing interval and depth by the direct measurement of the grinding wheel surface [J]. Journal of Materials Processing Technology, 1999, 88(1-3): 190-194.
[73] PANDDIT S M, SATHYANARAYANAN G. A model for surface grinding based on abrasive geometry and elasticity [J]. Journal of Engineering for Industry, 1982, 104(4): 349.
[74] 张小锋, 徐鸿钧, 吴琦, 等. 基于双目视觉技术的磨粒高度检测 [J]. 中国机械工程, 2007, 18(7): 812-815.
ZHANG Xiaofeng, XU Hongjun, WU Qi, et al. Height measurement of grinding wheel′s grain based on machine vision [J]. China Mechanical Engineering, 2007, 18(7): 812-815.
[75] 左洪福, 于辉, 刘昕. 磨粒三维测量的立体视觉方法 [J]. 仪器仪表学报, 2005, 26(2): 184-186.
ZUO Hongfu, YU Hui, LIU Xin. A stereo vision method for wear debris microscopic 3D measurement [J]. Chinese Journal of Scientific Instrument, 2005, 26(2): 184-186.
文章来源:《金刚石与磨料磨具工程》 网址: http://www.jgsymlmjgc.cn/qikandaodu/2021/0708/474.html
上一篇:卤晶用于生产磨具试验研究
下一篇:工程造价审计出现的问题及解决对策