金刚石磨具磨粒出刃高度的测试与调控研究进展(5)
【作者】网站采编
【关键词】
【摘要】[18] 柯明月, 揭晓华, 蒙云开, 等. 镀铬金刚石在金属结合剂金刚石工具中的应用 [J]. 热加工工艺, 2013, 42(12): 147-150. KE Mingyue, JIE Xiaohua, MENG Yunkai, et al. Applic
[18] 柯明月, 揭晓华, 蒙云开, 等. 镀铬金刚石在金属结合剂金刚石工具中的应用 [J]. 热加工工艺, 2013, 42(12): 147-150.
KE Mingyue, JIE Xiaohua, MENG Yunkai, et al. Application of Cr-coated diamond in diamond tools bonded with metal [J] Hot Working Technology, 2013, 42(12): 147-150.
[19] BLUNT L, EBDON S. The application of three-dimensional surface measurement techniques to characterizing grinding wheel topography [J]. International Journal of Machine Tools & Manufacture, 1996, 35(11): 1207-1226.
[20] BUTLER D L, BLUNT L A, SEE B K, et al. The characterization of grinding wheels using 3D surface measurement techniques [J]. Journal of Materials Processing Technology, 2002, 127(2): 234-237.
[21] 谢晋, 万启伟, 韦凤. 金刚石砂轮微观出刃形貌的参数化评价 [J]. 华南理工大学学报(自然科学版), 2009, 37(4): 46-51.
XIE Jin, WAN Qiwei, WEI Feng. Parameterized evaluation of microscopic protrusion topography of diamond grinding wheel [J]. Journal of South China University of Technology (Natural Science Edition), 2009, 37(4): 46-51.
[22] TAHVILIAN A M, LIU Z, CHAMPLIAUD H, et al. Experimental and finite element analysis of temperature and energy partition to the workpiece while grinding with a flexible robot [J]. Journal of Materials Processing Technology, 2013, 213(12): 2292-2303.
[23] 武明洲, 武友德. 出刃高度差对金刚石有序排布工具的影响 [J]. 工具技术, 2012, 46(6): 20-23.
WU Mingzhou, WU Youde. Influence on protrusion height difference between orderly arrangement of diamond tools [J]. Tool Engineering, 2012, 46(6): 20-23.
[24] 刘伟, 商圆圆, 邓朝晖, 等. 砂轮表面形貌检测方法的研究进展 [J]. 金刚石与磨料磨具工程, 2017, 37(6): 70-78.
LIU Wei, SHANG Yuanyuan, DENG Zhaohui, et al. Research progress of surface topography detection on grinding wheel [J]. Diamond & Abrasives Engineering, 2017, 37(6): 70-78.
[25] 陈锋, 周波, 王威, 等. 超硬磨具出露磨粒数量和磨粒出露高度的检测方法: 2.2 [P]. 2010-09-21.
CHEN Feng, ZHOU Bo, WANG Wei, et al. Detection method for the amount of abrasive grains and the height of abrasive grains exposed by superhard abrasives: 2.2 [P]. 2010-09-21.
[26] 王艳凤. 超声辅助单颗磨粒高速磨削试验研究 [D]. 焦作: 河南理工大学, 2015.
WANG Yanfeng. The experimental study on high speed grinding of the single grain with ultrasonic-assisted [D]. Jiaozuo: Henan Polytechnic University, 2015.
[27] WOJCIEH, NADOLNY K. Assessment of the grinding wheel active surface condition using SEM and image analysis techniques [J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2013, 35(3): 207-215.
[28] 李晓天, 孙方宏, 陈明, 等. 树脂结合剂砂轮表面形貌的激光扫描测量与分析 [J]. 机械科学与技术, 2001, 20(1):115-116.
LI Xiaotian, SUN Fanghong, CHEN Ming, et al. Laser scanning measurement and analysis of surface morphology of resin bonding grinding wheel [J]. Mechanical Science and Technology, 2001, 20(1): 115-116.
[29] 李晓天, 陈明, 孙方宏, 等. 激光修锐树脂结合剂砂轮的试验研究 [J]. 航空精密制造技术, 1999, 35(6): 6-8.
LI Xiaotian, CHEN Ming, SUN Fanghong, et al. Experimental study on laser sharpening resin bond grinding wheel [J]. Aviation Precision Manufacturing Technology, 1999, 35(6): 6-8.
[30] 许佳玲, 罗剑文, 龙钊, 等. ZEISS LSM 780激光扫描共聚焦显微镜的三维成像及分析 [J]. 电子显微学报, 2018, 37(1): 71-76.
XU Jialing, LUO Jianwen, LONG Zhao, et al. 3D imaging and analysis of ZEISS LSM 780 laser scanning confocal microscope [J]. Journal of Chinese Electron Microscopy Society, 2018, 37(1): 71-76.
[31] 韦凤. 金刚石砂轮微观出刃形貌的非接触检测及3D图形化评价 [D]. 广州: 华南理工大学, 2010.
WEI Feng. Non-contact measurement and 3D graphical evaluation of micron-scale protrusion topography of diamond grinding wheel [D]. Guangzhou: South China University of Technology, 2010.
[32] 王春辉. 金刚石砂轮磨块的摩擦化学修整 [D]. 大连: 大连理工大学, 2017.
WANG Chunhui. The dynamic friction dressing of the diamond block [D]. Dalian: Dalian University of Technology, 2017.
[33] 龚俊锋, 徐西鹏. 基于聚焦合成的砂轮表面三维重构方法 [J]. 金刚石与磨料磨具工程, 2006(4): 14-16.
GONG Junfeng, XU Xipeng. 3D surface reconstruction of grinding wheel topography based on depth from focus [J]. Diamond & Abrasives Engineering, 2006(4): 14-16.
[34] 陈锋, 陈五一, 陈志同. 基于激光三角法的CBN杯形砂轮表面形貌检测 [J]. 北京航空航天大学学报, 2011, 37(10): 1321-1325.
CHEN Feng, CHEN Wuyi, CHEN Zhitong. Laser triangulation based measurement about the surface 3D topography of a cup CBN grinding wheel [J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(10): 1321-1325.
文章来源:《金刚石与磨料磨具工程》 网址: http://www.jgsymlmjgc.cn/qikandaodu/2021/0708/474.html
上一篇:卤晶用于生产磨具试验研究
下一篇:工程造价审计出现的问题及解决对策